Cart Contents
Shopping Cart is Empty
Rubio Monocoat Oil Plus 2C Quick Drying
Rubio Monocoat Oil Plus 2C is a two component oil for indoor applications on wood, consisting of RMC Oil Plus (A) and RMC Accelerator (B). Very suitable for treating indoor applications which require quick drying. Rubio Monocoat Oil Plus 2C is applied in one layer.
Rubio MonoCoat is Free of VOCs!
Rubio Monocoat Oil is based on natural vegetable products without Volatile Organic Compounds. It has no effect on your indoor air quality. That means you get a non-toxic environmentally-friendly floor finish.
A spectrum of 18 Rubio Monocoat colors
Monocoat Natural 2C Oil finish is currently available in 18 colors, a complete range of choices to fit any design.
Rubio Monocoat is a Single-coat application
Rubio Monocoat Floor Finish Natural OilRubio Monocoat adheres with the first microns of wood by molecular bonding. As a result, Rubio Monocoat Natural Oil Floor Finish can cover an average 400 sq. ft. of floor per liter. And because of molecular bonding, no surface film can form, and no variable saturation can occur. Not only is a second coat not required, the finished wood will not accept a second coat. The same action protects against overlaps and color variance and causes the process to complete in a single coat.
Durable protection with Rubio Monocoat
The Monocoat molecular bond creates durable, long lasting protection. This product is also extremely suitable for industrial applications, both with oxidative and UV processes.
Sizes
350 ml & 1.3 Liter
Cleaning and Repair of Rubio Monocoat
- Ordinary Cleaning: Vacuum the floor using a soft brush attachment.
- Periodic Cleaning: Floors treated with Rubio Monocoat Oil can be cleaned with water and Rubio Monocoat Natural Cleaner (retains the matte look) or Satin Cleaner (if Satin Cleaner has been applied full strength to the floor to create a satin sheen.
- Spot Cleaning: Natural Cleaner is available in a spray bottle, Natural Cleaner = Surface Care Spray.
- Periodic Rejuvenation/Maintaining the oil finish: This should be done only when the "luster" of the oil finish has diminished.
- Attention! It is recommended to vacuum the floor using a soft brush attachment during the first 3 weeks after the Monocoat Oil has been applied on the floor. After a period of 3 weeks, the floor can be cleaned with a mixture of water and Monocoat soap.
More Information
Important: Do not use this product without consulting the full instruction and technical sheet.
Raw Wood Cleaner
Monocoat Raw Wood Cleaner is used as a cleaner for raw wood surfaces before the application of Monocoat Oil Plus and removes natural oil from exotic species. The product can also be used to clean materials that were used during the application.
Surface Care Spray
Rubio Monocoat Natural Soap Surface Care Spray cleans the floor and retains the natural matte finish of Rubio Monocoat Oil Plus and Oil Plus 2C. Premixed and ready to use in a convenient spray bottle for spot cleaning.
Natural Soap
To preserve the matte appearance of Rubio Monocat, vacuum the floor using a soft brush attachment during the first three weeks after the Monocoat Oil has been applied. After three weeks the floor can be cleaned with a mixture of water and Monocoat Natural Soap.
Soap Satin
Rubio Monocoat Satin Soap is applied to add a satin gloss to the Rubio Monocoat Oil Plus and Oil Plus 2C matte finish. The initial treatment, with undiluted product, can be done 36 hours after application of Monocoat Oil Plus or anytime thereafter. Oiled surfaces coated with Satin Soap should be cleaned periodically with a solution of ½ cup of Monocoat Satin Soap per gallon of water.
Rubio Monocoat Terrycloth Flat Mop
Fitted with a universal joint, this go-anywhere mop is ideally suited to application of all Monocoat cleaning and maintenance products. Terrycloth mopheads are machine washable.
